Welcome to EtherPeek NX!


1. To install EtherPeek NX, run the SETUP.EXE program in the
   EtherPeek NX directory. If you have problems running the
   setup program, try copying the files to your hard disk
   and running it from there.

2. To install iNetTools, run the SETUP.EXE program in the
   iNetTools directory.  If iNetTools asks you for a serial
   number, use your EtherPeek NX serial number.

3. iNetTools integration with EtherPeek NX is available from
   both installers, so it doesn't matter which setup program
   you run first.

4. The PacketGrabber installer is located in the PacketGrabber
   directory. This is a self-extracting installer that you
   can send to one remote user to gather packet traces from
   a remote network. Please refer to the README.TXT file 
   in the PacketGrabber directory for a description and 
   licensing information on the software.

5. Once EtherPeek NX is installed, the 1033\Documents subdirectory 
   will contain the EtherPeek NX Manual, the EtherPeek NX Quicktour,
   and the Peek SDK folder.  For more details on the Peek SDK, 
   see the Readme.html in the Peek SDK folder. All documents with 
   the ".pdf" extension are for use with Adobe Acrobat Reader(tm).


For technical support, please visit our web site
at http://www.wildpackets.com/support/contact/

WildPackets, Inc.
http://www.wildpackets.com

Copyright (C) 1997-2003. WildPackets, Inc.
All rights reserved.